Cookie Consent by TermsFeed
      technology-news-en
      mebucom-en
                
Clear-Com showcased COMduit for remote production

Clear-Com showcased COMduit for remote production

At Broadcast Asia 2018 (June 26 -28) Clear-Com showcased COMduit, the new fiber based solution for audio and video transport between booth, field, production truck and any other remote location. COMduit provides a template for a range of products needed for remote broadcast production. The solution is based around Clear-Com’s ProGrid audio and video transport products, LQ for intercom over IP and BroaMan’s MUX-22 signal multiplexer.

“Clear-Com IP and BroaMan create an easy integration and control between the two companies’ leading audio and video solutions,” said Simon Browne, Vice President of Product Management, Clear-Com. “These fiber transport template solutions provide truly integrated transport and distribution solutions for video, audio, intercom and data for broadcast remote truck to field and announce booths — with the simplicity and low latency of fiber.”

The demonstration solution is built into three flight cases and supports fiber transmission for a typical remote sports or news broadcast, or any other situation that uses dark fiber between multiple sites. The cases, named ‘Truck,’ ‘Booth’ and ‘Field’ only require electric power and two duplex single-mode fiber cables. The BroaMan devices are configured so that multiple fiber and IP networks are multiplexed for transport using a single duplex fiber cable; one cable from Truck to Booth, and one from Truck to Field. 

“All of the required signals are transmitted and received over those two connections; eight channels of HD video, up to 768 channels of audio, and a copper-based network of LQ devices with multiple Clear-Com or RTS intercom connections,” added Rom Rosenblum, Application Engineer, Clear-Com. “These various networks are combined using the multiplexing abilities of the BroaMan products with the Optocore audio network optically multiplexed with the video point-to-point connections, and the Ethernet networks embedded in the same. The system is designed to support multiple announcers with IFB, cue, video preview, audio mix, timecode, control GPIO and any other audio feeds as required.” 

The COMduit solution will be available for demonstration along with a wide range of Clear-Com’s communication systems at IBC 2018 in Amsterdam as well (booth 10.D29). (6/18)

Zurück


Relevant Companies
Similar Products